SAFE TO USE: Brew Clean solution is a safe and easy to use powder solution. It will not cause rust on kegs or home brew equipment, as this formula helps protect metals from corrosion. This cleaning solution works well with stainless Cornelius/Firestone style kegs, other stainless-steel kegs, as well as glass, plastic, and rubber home brew equipment.
HOW TO USE WITH KEGS: Use at least two tablespoons (more if kegs are stained), and fill kegs with hot water. Depress dip tube poppets and allow tubes to fill with the solution. To soak the keg lid, add solution and hot water to a bucket with the pressure relief valve open. We suggest adding one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Water should be between 100 and 160 degrees. Let sit for at least one hour, then rinse with clean water. (BUCKET NOT INCLUDED).
HOW TO USE WITH BEER LINES: Use your Kegconnection Kegerator beer line cleaning kit with this refill of Brew Clean to clean your beer lines. Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Run half the watery solution through your beer lines into a bucket. Dis-assemble your faucets and place them in a bucket with the solution. Let everything soak for about an hour. Run the remaining solution through your lines followed by clean water. (BUCKET & KIT NOT INCLUDED).
HOW TO USE WITH HOME BREW EQUIPMENT: Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water (more if items are heavily soiled or stained). Use hot tap water between 100 and 160 degrees. Let each piece of equipment soak for at least one hour for maximum cleaning.
OTHER BENEFITS: This powerful cleaning solution cuts down on scrubbing, and will not leave a film on your kegs, lids, or other home brewing equipment. Proudly made in the USA.
